منتديات دريم السعودية  

العودة   منتديات دريم السعودية > قسم رسيفرات +VU > شروحات رسيفرات الفيو بلاص

إضافة رد
 
أدوات الموضوع انواع عرض الموضوع
قديم 16-02-2016, 10:29 AM   رقم المشاركة : 1
معلومات العضو
mohdar
عضو جديد
 







mohdar غير متواجد حالياً

mohdar is on a distinguished road
 
mohdar is on a distinguished road
Thumbs up شرح بلجن backup tools

This util will make a backup of your Vu+ settings, Channel List, Satellites, Dish Positions, Radio Stations, Favourites, Timezone.

Unzip Instructions

Unzip all the files including the "enigma2" & "tuxbox" folders in this zip to your local HDD.
Be sure to tick the box "Use Folder Names" or "Extract Full Paths" depending on your Zip Utility.
File structure should look like this on your Hard Disk after unzipping.

enigma2 (folder)
tuxbox (folder)
Instructions.txt (this file)
Vu_Settings_backup.exe (Main Program)

If you don't see the "enigma2" & "tuxbox" folders then you've unzipped the files incorrectly and the application won't
function without them.

Instructions

To get the IP number of the Vu+ Press Menu on Vu+ Remote Control.
Select Setup and Press OK
Select System and Press OK
Select Network and Press OK
Select Network Test and Press OK

This will show the Vu+ IP Address, example 192.168.1.7

Program Instructions

1. Run the Vu_Settings_backup.exe program.
2. Enter the IP address of your Vu+ in the IP Address field
3. If you have changed the password on your receiver, enter the password in the password field otherwise leave blank.
4. Click Connect Button

Now click on BACKUP button.
This will backup all the settings files from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
The /enigma2 and /tuxbox folders are located in the same folder as this program.

To RESTORE your Vu+ settings after flashing a new Image simply do the following.

1. Run the Vu_Settings_backup.exe program.
2. Enter the IP address of your Vu+ in the IP Address field
3. If you have changed the password on your receiver, enter the password in the password field otherwise leave blank.
4. Click Connect Button

Now click on the RESTORE button.

All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
Once the files have successfully been restored you'll need to reboot the receiver by powering off and on using the switch on
the back of the receiver.

Downloud
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط. اضغط هنا للتسجيل]






التوقيع :
منتديات دريم السعوديه
رد مع اقتباس
إضافة رد

مواقع النشر (المفضلة)


تعليمات المشاركة
لا تستطيع إضافة مواضيع جديدة
لا تستطيع الرد على المواضيع
لا تستطيع إرفاق ملفات
لا تستطيع تعديل مشاركاتك

BB code is متاحة
كود [IMG] متاحة
كود HTML معطلة

الانتقال السريع


الساعة الآن 05:42 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
adv helm by : llssll