Smart Card download procedure:
1.- Select Ci menu->UCAS V3.0->Download
2.- The messages "Erasing old data, please wait..." and "Insert card 1 or serial
dummy card" will be shown.
3.- Insert the first smart card and press Ok.
4.- The message "Card inserted, opening" is shown, and then
"Performing smart card download..."
5.- If several cards are used, the message "Download card completed.
Please, extract it" will appear after the first smart card has been
downloaded.
Extract the Smart Card and press Ok. After that, a message such as
"Insert card 2" will be shown.
6.- Insert the next smart card and press Ok.
7.- After the last smart card is downloaded, the message "Download complete.
Copying image and re-booting" will be shown. If the new version of software
is not shown after 30 seconds, re-insert the module without any smartcard.
If, after re-inserting the module, it is not initialised, switch off and
on again the STB with the module inserted.
Notes:
1.- If you experience any problem before starting the downloading, a message
such us "invalid card" is shown. If so, extract the smart card, press ok,
and check that it is the first one. After that, insert it again and press
ok.
You can also try by inserting the module with the smart card already
inserted on it. In this case, you don't need to press Ok in step 3.
2.- If the smartcard is extracted or it does not respond, a message will be
shown. Press Ok, and the next menu will be shown:
- Go on with current download
- Start a new download.
Select "Go on" in order to continue with the current smart card...
or select Start a new download to start with the first smart card
Then follow the instructions.
If you extract the module while a downloading is performed, you can continue
with the current smart card in the same way because this same menu will be
shown after selecting the downloading menu.
14-10-2003, 11:43 AM
العرض العادي
