|
26-05-2003, 05:38 AM
|
رقم المشاركة : 1 | ||||
|
تفضلو الباتش الجديد ((( وصل )))
اذا بغيت تحمله من الموقع الأصلي فلك ما تريد [فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط. اضغط هنا للتسجيل] وإذا بغيت تحمله تحميل مباشر فلك ايضاً ما تريد [فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط. اضغط هنا للتسجيل] وهذه هي مواصفاتـــــــــــــــــــــــــــه Bugfixes/Changes of ToH3.0: =========================== - Most of ToH menus are converted to original Humax-Menu engine (rest will follow) - New Config Menu - Advanced ChannelInfoBox with signal power and signal quality - New Audio Video User settings - YUV added to Video formats (a little circuit is needed for YUV) (thanx to Cybergent and oldowl from [فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط. اضغط هنا للتسجيل]) - Gain adjustment for RGB/YUV - Format ratio enlarged with Auto 16:9/4:3 function - Premiere NVOD management function (Portalmode) with yellow key on Portalchannel - Direct card access mode, done with Mickey - Time Offset (TO) in PMCT reactivated - New Motor Movement Management - ChannelInfoBox stays during Movement - Up to 49 Motor positions available - Orbital positions with degree-context - All Satellites with new SatcoDX transponder tables for autoscan - New help window with most channel infos - Option for transparent background picture - Option to close channellist with OK button - R/L Audio Option in PMCT to select 2 channel audio films - Function to repeat DiSEqC command for two times - O-EPG to get ToH EPG mode - Pacman - Most of ToH menus are converted to original Humax-Menu engine (rest will follow) Most of the ToH style design modules and menus are converted to a common like style. Some of the ToH menus have still to be converted, it will follow in future versions. - New Config Menu There is a new config menu you call it in the ToH entry in main menu, to control most of the available ToH extended features. - Advanced ChannelInfoBox with signal power and signal quality Now in ChannelInfoBox signal power and signal quality is shown and a new symbol if Portalmode is available on the channel. - New Audio Video User settings Since this version it is possible to store three independent Audio Video Setting of your own. So you can store one mode for using YUV on a projector and one other mode to use the receiver with a television in RGB or CVBS mode. You can select mode while pressing blue remote control key (UHF), if you press OK on one selected mode, you can change A/V Output Settings. All changes are stored in settings. - YUV is added to Video formats selection (a little circuit is needed for YUV) With this version there is a direct YUV mode support, you can select it like other modes (RGB/CVBS/S-Video/YUV). A little circuit is needed to add C-Sync signal to the Y-Output of the Humax Scart connector. You can see it in the attached picture Humax_YUV.jpg. - Gain adjustment for RGB/YUV It is possible to control and store RGB and YUV gaining with A/V Output Settings. - Format ratio enlarged with Auto 16:9/4:3 function All possible Screen Modes can now be controlled with A/V Output Settings. - Premiere NVOD management function (Portalmode) with yellow key on Portalchannel A new Portalmode is added to select PPV Subchannels on Premiere. An own documentation is added for this (see Potalmode.html). - Direct card access mode, done with Mickey It's possible to set card commands from PC, for example to set PIN for Premiere cards. More info will follow in the future. - Time Offset (TO) in PMCT reactivated Like in older versions it is possible to activate/deactivate Time Offset function for special channels with an PMCT entry. Die DiSEqC Motorsteuerung wurde überarbeitet. Der Null Punkt Rücklauf zu Astra beim Einschalten wurde entfernt. Ebenfalls wurde die Autofocus Funktion überarbeitet. - New Motor Movement Management The DiSEqC motor controlling was done in a new way. The zero movement to Astra during startup was removed. The lost of focus for motors was worked out. - ChannelInfoBox stays during Movement The ChannelInfoBox stays during whole motor movement, to see signal during movement. - Up to 49 Motor positions available Now it is possible to store about 49 different satellites positions. The positions with a * have to be positioned by your own. They are used for an overview. - Orbital positions with degree-context All satellites are shown with the correct orbit position also during movement. - All Satellites with new SatcoDX transponder tables for autoscan Transponder list are worked over to scan the right transponders using an autoscan. - New help window with most channel infos All useful infos are now shown in the help window by pressing ? on a channel. It can be scrolled by using cursor up/down. - Option for transparent background picture The selection for background pictures was added to get picture transparency. So you can see how some changes will change the picture in a direct way (for example RGB/YUV gaining). - Option to close channel list with OK button Now users can select, if channel list will be closed after pressing OK in the channel list or it shall work like in older versions. You can control it in Config Menu. - R/L Audio Option in PMCT to select 2 channel audio films It is possible to select which audio language shall be active, if a channel shall works as a 2 channel audio mode channel. It is useful for channels, which sends original audio on Right and foreign audio on Left channel. You can select with PMCT in ToH EPG module, which channel shall be active while switching to such a channel. You get with the 2. Byte IdentExt in PMCT: D0 = Check-DD D1 = no Check-DD A0 = L/R (Default) A1 = L Audiokanal A2 = R Audiokanal - Function to repeat DiSEqC command for two times For people who use a 12V- or option-switch cascaded together with a multi-switch, there is a problem to get the commands in correct order to the switches. With this option in Config Menu it is possible to send the DiSEqC command two times. One time before setting the 12V voltage and a second time after setting it, to avoid switching problems, which results in getting no signal. - O-EPG to get ToH EPG mode In this version the original Humax EPG is called while pressing the EPG key on the remote control. If you want to have the ToH EPG module, you get it by pressing 0+EPG. [sound]http://www.vgmusic.com/music/computer/miscellaneous/msx/Kv2-03.mid[/sound] |
||||
|
|
26-05-2003, 07:11 AM
|
رقم المشاركة : 2 | ||||
|
يعطيك العافيه اخوي السنيور |
||||
|
|
|
26-05-2003, 11:39 AM
|
رقم المشاركة : 3 | ||||
|
تفضل
البتش الجديد بدون بحث |
||||
|
|
|
26-05-2003, 12:07 PM
|
رقم المشاركة : 4 | ||||
|
شكرا لك |
||||
|
|
|
26-05-2003, 01:16 PM
|
رقم المشاركة : 5 | ||||
|
مشكور ياسيدي
مشكور يا بطل |
||||
|
|
|
26-05-2003, 01:43 PM
|
رقم المشاركة : 6 | ||||
|
الله يعطيك الف عافيه اخي السنيور |
||||
|
|
|
26-05-2003, 02:39 PM
|
رقم المشاركة : 7 | ||||
|
الرجاء من الاخوه الكتابه بالغة العربية ،وعموماً مشكورين على هذا الجهد الكبير |
||||
|
|
|
26-05-2003, 02:57 PM
|
رقم المشاركة : 8 | ||||
|
. |
||||
|
|
|
26-05-2003, 03:40 PM
|
رقم المشاركة : 9 | ||||
|
. |
||||
|
|
|
26-05-2003, 04:21 PM
|
رقم المشاركة : 10 | ||||
|
0000000000000000
بصراحه الباتش الجديد طلع مقلب 000 ((( لا فيه كوناكس ولا فيديو جارد ))) |
||||
|
|
|
27-05-2003, 02:32 AM
|
رقم المشاركة : 11 | ||||
|
يعطيك العافيه اخوي السنيور |
||||
|
|
|
27-05-2003, 05:57 AM
|
رقم المشاركة : 12 | ||||
|
العفـــــــــــو من الجميــــــــــــع |
||||
|
|
|
27-05-2003, 01:59 PM
|
رقم المشاركة : 13 | ||||
|
الف شكر اخي السنيور |
||||
|
|
|
27-05-2003, 02:11 PM
|
رقم المشاركة : 14 | ||||
|
المميزات الذي اكتشفت الى الان ويوجد بعضها لا اهمية له لم اذكرها |
||||
|
|
|
27-05-2003, 10:43 PM
|
رقم المشاركة : 15 | ||||
|
طريقه تعديل الخلفيه للباتش الجديد بكل بساطه وسهوله |
||||
|
|
 |
| مواقع النشر (المفضلة) |
|
|
العرض العادي
